Breadboard/Prototyping Kits SSODK1

This product has been discontinued. The information on this page is for reference only, and no new orders will be accepted.

Complete surface-mount development kit.

SSODK1: SO/SSO Development Kit

Qty	Item	Description
1	GD-970-3.8A	Prototyping motherboard
2	GD-SO8	SMT Adapter for SO8 device
1	GD-SO16	SMT Adapter for SO16 device
1	GD-SO20	SMT Adapter for SO20 device
1	GD-SSOx	SMT Adapter for SSO device (specify below)
1	131006-A	BNC connectors,⁽²⁾ 4 pcs.
1	56002867 or 56002797	Voltage regulator SIP module (specify below)
1	131002-A	Pin sockets, low-profile, 100 pcs.
1	31002086	Modular jack
1	88000103	Voltage cable with modular plugs/leads

Choose your SSO pin count and voltage regulator module to specify your kit number:

For your SSO adapter, specify -20 for the SSO20, -24 for the SSO24, etc.
For your Voltage Regulator SIP module, specify:
- "-B" for the adjustable bipolar ±5 V module. This module provides one negative voltage (-3.3 to -5.5 V) and one positive voltage (+3.3 to +5.5 V).
- "-DP" for the dual-positive voltage module. This module provides two adjustable positive voltages, each +3.3 to +5.5 V.

For example, specify kit number SSODK1-30-DP to order a development kit for an SSO30 device, with a dual-positive voltage regulator module.

Choose additional items to complete your kit.

(1) Due to the discounting on these kits, no substitutions may be made within the kit contents, with the exception of the BNC/SMA connectors, PLCC/QFP pin selection and voltage regulator module selection. Additional items can be ordered separately. Kit contents do not count towards volume discounts on items ordered separately.

(2) The SO/SSO and QFP development kit motherboards have a special I/O connector footprints that accept either BNC or SMA connectors. Kits are supplied with BNC's, and SMA connectors can be ordered separately.