Voltage Regulator SIP Module
Voltage Regulator SIP Modules--DISCONTINUED
This product has been discontinued. The information on this page is for reference only, and no new orders will be accepted.
 |
Applications:
Features:
|
The PRL family of stand-alone, linear voltage regulator SIP Modules provides instant power for breadboarding and prototyping digital, linear and RF circuits with ECL, PECL, RS422 and TTL/CMOS devices.
They are designed specifically for use with the GD-970-3.8 and GD-980-6 Gigadapter motherboards but can be used with any circuit boards with pads on 100-mil centers, including those in the PRL-series Custom Circuit Kits. All SIP modules in this family share compatible footprints and can be powered by the 15000080 ±8.5 V/±1 A AC/DC adapter.
Using low-profile pin sockets, P/N S090004, in motherboard locations P11-P16, P21-P23 and P31-P33, these voltage regulator modules can be easily interchanged for different applications. The six models currently available are:
|
Model No.* |
Description |
Application |
Vo1 |
Vo2 |
Vo3 |
Vo4 |
Size: |
|Vin-Voç |
|
56002787 |
Dual Negative Outputs, |
ECL, LVECL |
NA |
-3.3 V to –5.5 V, |
NA |
-2 V, 100 mA |
0.825" |
3 V |
|
56002797 |
Positive & Negative Outputs, |
Linear, TTL, CMOS |
3.3 V |
-3.3 V to –5.5 V, |
NA |
NA |
0.825" |
3 V |
|
56002807 |
Three Outputs, |
ECL, Linear, TTL, CMOS |
3.3 V to |
-3.3 V to –5.5 V, 300 mA |
NA |
-2 V, 100 mA
|
0.825" |
3 V |
|
56002817 |
Four |
ECL, |
3.3 V |
-3.3 V to –5.5 V, 500 mA |
+3 V, 200 mA |
-2 V, 100 mA |
1.7" |
3 V |
|
56002867 |
Dual |
CMOS Imager |
3.3 V to |
NA |
3.3 V |
NA |
0.825" |
3 V |
The 56002787 module has an adjustable –3.3 V to –5.5 V/-300 mA and a fixed –2 V/-100 mA outputs. It is designed for ECL circuits. The –2 V output is the bias voltage VTT for the 50 W/-2 V ECL input termination.
The 56002797 module has a pair of ±3.3 V to ±5.5 V/±300 mA outputs. It is designed for linear and TTL/CMOS circuits.
The 56002797-15 module has a pair of ±13 V to ±15.5 V/±200 mA outputs. It is designed for linear circuits.
The 56002807 module has a pair of ±3.3 V to ±5.5 V/±300 mA outputs and a –2 V/-100 mA output. It is designed for mixed ECL and TTL/CMOS circuits. This can be used with all the Gigadapter motherboards except for the GD-970-3.8A.
The 56002817 module has a pair of ±3.3 V to ±5.5 V/±400 mA outputs, a –2 V VTTN output for ECL input termination and a +3 V VTTP output for PECL input termination. The +3 V VTTP output is a current–sink only supply, and it should not be used for biasing TTL circuits. It is designed for mixed ECL, PECL TTL/CMOS and Linear circuits.
This module is larger than the rest and is intended for use with the GD-980-6 motherboard and the PRL-980 series extrusion. However, it can also be used with PCBs in the PRL-970 series if the aluminum enclosure is not used.
The 56002867 module has two identical adjustable 3.3 V to 5.5 V/300 mA outputs. It is designed for mixed 3.3 V and 5 V TTL/CMOS circuits and also for applications where separate analog VDD and digital VDD supplies are required.
* Other output voltages available on custom orders.
** With cooling, higher input voltages can be used. Maximum Vin-Voêshould be limited to 8 V.
*** With cooling, output currents can be increased to ±600 mA.
Click on this image for a larger view:
The common module pin assignment is shown below (note that not all pins are used in every module):
|
Model No. |
P11 |
P12 |
P13 |
P14 |
P15 |
P16 |
P21 |
P22 |
P23 |
P31 |
P32 |
P33 |
|
56002787 |
+8.5 V |
-8.5 V |
NC |
NC |
GND |
GND |
NC |
GND |
VEE Out |
NC |
GND |
NC |
|
56002797 |
+8.5 V |
-8.5 V |
NC |
NC |
GND |
GND |
Vcc Out |
GND |
VEE Out |
NC |
GND |
NC |
|
56002807 |
+8.5 V |
-8.5 V |
NC |
NC |
GND |
GND |
Vcc Out |
GND |
VEE Out |
NC |
GND |
NC |
|
56002817 |
+8.5 V |
-8.5 V |
NC |
NC |
GND |
GND |
Vcc Out |
GND |
VEE Out |
VTTP |
GND |
VTTN |
|
56002867 |
+8.5 V |
-8.5 V |
NC |
NC |
GND |
GND |
Vcc1 Out |
GND |
NC |
Vcc2 |
GND |
NC |