Pulse Research Lab 3D Model Data

PRL-425T 3D Model

While PRL does not have 3D models for all of our products, we do have a model prototype and additional information to help you create your own models. Please note that all information provided on this page is non-contractual, and provided for reference only. If you can share with the community a completed model for a PRL product or accessory, please email sales@pulseresearchlab.com and receive a small token of our appreciation!

  • A STEP model of the PRL-425T, Universal Differential Receiver with TTL Outputs (shown above) is available as a reference and starting point for your model.
    • The PRL-425T and brackets were modeled by a PRL customer and released for us to share, based on a previously-shared model of the PRL-255CN (thank you, Lucrezia C., Cardwell Engineering, LLC., and Stephen C.!)
      • The internal printed circuit board is not modeled, and the extruded aluminum enclosure is modeled as a simple box, without the internal PCB support rails.
      • The model is sufficient for most applications that are concerned with the bounding box. If your model requires internal details, please contact support@pulseresearchlab.com for additional information.
    • Many PRL modules share the same form factor, which is defined by the extrusion series and length, the left-side endplate number, and the right-side endplate number.
      • The endplate numbers also define which connectors are attached.
      • For example the PRL-425T is of the type PRL-970-3.8-43-42, which is shared by several models.
      • For an endplate with opening(s) that can be populated by more than one type of connector, the endplate number will have a differentiating suffix, such as -137T or -137B, for Triax or BNC, respectively.
    • While we believe these model to be accurate, no representations are made as to accuracy or suitability for any application
  • All PRL modules with a cross section of 1.3" x 2.9" share the same extruded aluminum enclosure (PRL-970 Series) in a variety of standard lengths, with various combinations of endplates and connectors
    • Drawing 39001085-X7.pdf provides the extrusion lengths for several model prototypes, as well as the mounting hole locations for our mounting brackets and the protrusion beyond the extrusion for the various connectors we use.
    • Drawing 38500002.pdf shows the endplates used by all products in the PRL-970 Series.
  • PRL modules with a cross section of 3.0" x 6.8" share the larger extruded aluminum enclosure ( PRL-985 Series) in a variety of standard lengths, with various combinations of endplates and connectors.
  • The table at the bottom of this page shows the endplates and connectors used by each model.
  • A table of individual components is available below.
    • Component models were downloaded from the manufacturers' websites, and no representations are made as to accuracy or suitability for any application.
    • In some cases the part number for the 3D model is not an exact match for the part number used by PRL (e.g. C&K T101LHAVGE vs. T101LHAVKE), and/or the model for a cross-referenced part is used, but the differences are in color, material finish, or other properties which do not affect the 3D model.
  • If you do not have a 3D model viewer, eDrawingsViewer is available from Dassault Systemes SOLIDWORKS as a free download for Windows, Mac OS, iOS, and Android. It will open STEP, IGES, and many other formats.
    <td">970-3.8-43-42
    Component Description Manufacturer P/N 3D Model File
    Completed Models
    PRL-970 Series Module, 3.8" Extrusion Length, -43 and -42 endplates PRL-970-3.8-43-42

    PRL-425T_Models.zip

    (STEP and Solidworks)

    Extrusion
    PRL-970 Series Extrusion, 3.8"  Length PRL-970-3.8EX PRL-970-3.8EX.step
    Mounting Brackets
    970 Series Mounting Bracket 35001420 Brackets_35001420-X1.step
    Signal I/O Connectors
    BNC AMP 5413631-1 BNC_c-5413631-1-c-3d.stp
    Threaded BNC Bomar SD361V504ET Bomar_BNC_SD361V504ET.STEP
    BNC Plug Bomar SPX44398 coming soon
    End-launch SMA EF Johnson 142-0701-871 SMA_142-0701-871.stp
    End-launch SMA EF Johnson 142-0701-851 SMA_142-0701-851.stp
    End-launch SMA Plug EF Johnson 142-0801-811 Coming soon
    End Launch SMA (Upper) Lighthorse LTI-SASF55M-GT SMA_SASF55MGT.STEP
    Rt-Angle SMA EF Johnson 142-0701-501 SMA_142-0701-501.stp
    Triax Trompeter CBBJR79 Triax_CBBJR79.stp
    Micro-D9 Plug Cristek 836111012 836111012.stp
    Micro-D9 Plug Molex 83611-9006 Molex_MicroD_PCB_Plug_836119006.stp
    Micro-D9 Receptacle Cristek CIM13-AXXXX Cristek_MicroD_PCB_Rcpt_CIM13-AXXXX.step
    Micro-D9 Plug Ulti-Mate SD-836110012 Micro_D9_Plug_836110012.STEP
    RJ45 Molex 43860-0013 RJ45_438600013.stp
    Power Connectors
    Modular DC Jack (4P4C) Molex 52018-4446 DCJack_52018-4446.stp
    Barrel DC Jack Wurth 694106301002 DCJack_694106301002.step
    Binding Post Pomona 3760-0 Insulated_Binding_Post.STEP
    Controls
    Toggle Switch C&K T101LHAVGE Toggle_Switch_T101LHAVKE.stp
    Rotary Switch Elma 07-1143-3000003 RotarySwitch_CH13-07-Dummy_07-1XXX-30000X-C.stp
    Rotary Knob Elma 021-2225 021-2125_Knob_with_040-1625_Cap.stp
    Stick Pins SamTec TSW-108-25-G-D-RA StickPins_TSW-108-25-G-D-RA.stp
    USB Receptacle KobiConn 154-2442-E USB_61400416121.stp
    DIP switch Apem NDPL-02 & NDPL-10

    DIPSwitch_NDPL-02V.STEP

    DIPSwitch_NDPL-010V.STEP

    Fasteners/Misc
    Endplate Screw Fastenal 32336 Screw_32336-Fastenal-01-18-2019.stp
    SMA Washer washer, lock, int tooth, id6.5, od10.2, 0.5thk SMA_Washer.STEP
    SMA Nut NUT, HEX, .250 - 28, 1.7THK, BRASS, GOLD SMA_Nut.SLDPRT
    BNC/Triax Washer AMP-1-0329632-2 BNC_Washer_c-1-329632-2.stp
    BNC/Triax Nut AMP-1-0329631-2 BNC_Nut_c-1-329631-2.stp
    Toggle Switch Washer 1/4-40 Internal Tooth Lock Washer coming soon
    Toggle Switch Nut 1/4-40 Hex Nut  Toggle_Switch_Nut_c-1437561-9.stp
    LED Dialight 555-2007F  LED_5552XXX_swrp.igs

     

    PRL Model
    (970 Series)

    Extrusion Length

    Input Endplate
    (38500002-)

    Input Components

    Output Endplate
    (38500002-)

    Output Components

    PRL-171-xx

    PRL-172-xx

    PRL-173-xx

    2.8" -21

    DC Jack

    -43

    SMA

    PRL-220A

    2.8" -109

    Threaded BNC

    Toggle Switch

    DC Jack

    -69

     BNC

    PRL-230-BNC

    2.8" -109

     

    Threaded BNC

    Toggle Switch

    DC Jack

    -141

     Threaded BNC

    PRL-230-SMA

    2.8" -123

    SMA

    Toggle Switch

    DC Jack

    -143 SMA

    PRL-240A

    2.8" -109

    Threaded BNC

    Toggle Switch

    DC Jack

    -80 BNC

    PRL-350ECL

    PRL-350LP

    PRL-350LP-NIM

    PRL-350NIM

    PRL-350P

    PRL-350RS

    PRL-350TTL

    PRL-350TTL-NIM

    PRL-350A-TTL

    PRL-426LP

    PRL-426N

    PRL-426P

    PRL-427N

    PRL-450LPD

    PRL-450ND

    3.8" -53

    SMA

    Toggle switch

    -42

    SMA

    DC Jack

    PRL-430AN-SMA 2.1" -53

    SMA

    Toggle switch

    -42

    SMA

    DC Jack

    PRL-431AN-SMA 2.1" -76

    SMA

    Toggle Switch

    DC Jack

    -43

    SMA

    PRL-414B 2.8" -109

    Threaded BNC

    Toggle Switch

    DC Jack

    -69 BNC
    PRL-414B-C003-BNC 3.8" -109

    Threaded BNC

    Toggle Switch

    DC Jack

    -133 Threaded BNC
    PRL-414B-C003-SMA 3.8" -123

    SMA

    Toggle Switch

    DC Jack

    -142 SMA
    PRL-414B-SMA 2.8" -123

    SMA

    Toggle Switch

    DC Jack

    -43 SMA
    PRL-414C-BNC 2.8" -109

    Threaded BNC

    Toggle Switch

    DC Jack

    -24

    BNC

    Toggle Switch

    PRL-414C-SMA 2.8" -123

    SMA

    Toggle Switch

    DC Jack

    -53

    SMA

    Toggle Switch

    PRL-420LPD

    PRL-420ND

    PRL-420PD

    PRL-420RS

    PRL-420TD

    PRL-426T

    3.8"

    -65

     

    BNC
    Toggle Switch

    -42

    SMA

    DC Jack

    PRL-420RSTR

    PRL-426TTR

    3.8" -65 BNC
    Toggle Switch
    -44

    Triax

    DC Jack

    PRL-420TD
    (see PRL-420RS)

     

    PRL-424LV 5.0" -118

    BNC

    SMA

    -105

    SMA

    DC Jack

    PRL-424NLV 5.0" -106

    BNC
    Toggle Switch

    SMA

    -105

    SMA

    DC Jack

    PRL-425QLT-SMA

    PRL-425QRT-SMA

    2.8" -122 SMA -42

    SMA

    DC Jack

    PRL-425N

    PRL-425RS

    PRL-425T

    PRL-426RS

    PRL-427LP

    PRL-429LP

    3.8" -43 SMA -42

    SMA

    DC Jack

    PRL-422RS

    PRL-425NTR

    PRL-425RSTR

    PRL-425TTR

    PRL-426RSTRI

    PRL-432N

    3.8" -62 Triax -42

    SMA

    DC Jack

    PRL-422NECL

    PRL-426NTR

    PRL-433N

    3.8" -53

    SMA

    Toggle Switch

    -44

    Triax

    DC Jack

    PRL-426T

    (see PRL-420RS)

     

    PRL-444-BNC 2.8" -33

    BNC

    DC Jack

    -24

    BNC

    Toggle Switch

    PRL-444-SMA 2.8" -42

    SMA

    DC Jack

    -53

    SMA

    Toggle Switch

    PRL-444LV-SMA 2.8" -149

    Toggle switch

    SMA

    DC Jack

    -92 SMA
    PRL-450ND
    (see PRL-350)
    PRL-454LV-SMA 2.8" -71

    SMA

    DC Jack

    -92 SMA
    PRL-454T-SMA 2.8" -150

    Toggle switch

    SMA

    DC Jack

    -92 SMA
    PRL-730 1.4" -49 DC Jack -49 DC Jack
    PRL-735 1.4" -48 Binding Post -49 DC Jack
    PRL-860D-SMA 1.4" -124 SMA -43 SMA
    PRL-860Q-SMA 1.4" -130 SMA -146 SMA
    PRL-RJ45-SMA 1.4" -92 SMA -132 RJ45

     

    PRL Model
    (985 Series)

    Input Endplate
    (38002520-)

    Input Components

    Output Endplate
    (38002520-)

    Output Components
    PRL-4110-BNC -41

    Threaded BNC

    Toggle Switch

    DC Jack

    -40 Threaded BNC
    PRL-4110-SMA -43

    SMA

    Toggle Switch

    DC Jack

    -42 SMA