Support and Discussion Forum
-
Fanout Buffers / Digital Signal Distribution / Pulse Distribution Amplifiers
If you need multiple copies of your digital signal (TTL/CMOS, LVDS, RS422, NECL/LVPECL). RF/Analog distribution goes in the RF/Analog forum.0
Topics0
Posts -
Logic Level Translators / Converters
Converting to/from TTL/CMOS from/to LVDS, RS422, NECL/PECL/LVPECL, NIM, Sinewave, or small pulse / small signal? Single-ended to differential or Di...0
Topics0
Posts -
Driving Long Lines
Long line drivers/receivers, including discussions of transmission line effects, matched impedance, etc.0
Topics0
Posts -
Frequency Division
Converting high frequency to low frequency, e.g. 80 MHz down to 1 kHz or even 1 Hz, with low-jitter.0
Topics0
Posts -
Switching / Scanning / Routing of Signals
Switch or route one signal to multiple destinations, or choose from multiple signal sources.0
Topics0
Posts -
Passive Signal Adaptation and Coupling
Convert coax to mass-terminated RJ45, D38999, or Triax. Add a series or shunt termination. Convert DC-coupled to AC-coupled.0
Topics0
Posts -
RF / Analog Distribution, Amplification, Filtering, and Conversion
Distribute and/or amplify RF / CW / Sine waves. Filter square waves into sine waves.0
Topics0
Posts -
Other
Details of NECL/PECL termination, bias tees, variable output line drivers, or any other technical / product question that doesn't fit above.0
Topics0
Posts -
2
Topics2
Posts -
0
Topics0
Posts -
0
Topics0
Posts -
1
Topics1
Posts -
0
Topics0
Posts
Latest topics
-
1
Posts2
Views -
1
Posts7
Views -
1
Posts67
Views

