2 Ch. Translator, NECL to LVPECL, 1.25 GHz

SKU:

$ 741.75

Applications:

  • Converting Single Ended or Differential NECL Signals to Differential LVPECL Signals
  • High Speed Digital Communications systems Testing
  • High Speed SONET Clock Level Translation

Features:

  • fMAX > 1.25 GHz
  • 600 ps tr
  • 50 Ω/VTT Input Terminations
  • Single Ended or Differential Inputs
  • Complementary LVPECL Outputs drive 50 Ω/+1.3 V Terminations, AC-coupled or Floating 50 Ω Loads
  • DC coupled I/Os with SMA Connectors
  • Self-contained 1.3 x 2.9 x 2.9-in. unit including an AC/DC Adapter

Description

The PRL-460ANLPD is a dual channel NECL to LVPECL Logic Level Translator module, intended for operation from DC to the GHz range. Maximum clock frequency is typically 1.5 GHz. These modules can receive either single-ended or differential input signals, to be selected by a switch.

The complementary outputs of these modules are designed for driving 50 Ω loads terminated to +1.3 V, and they can also drive AC coupled or floating 50 Ω loads. These high speed translator modules facilitate testing and integration of high speed digital communications circuits and systems, where conversion of signals from NECL to LVPECL logic families is often required

The PRL-460ANLPD is designed to interface with NECL circuits operating with a -5.2 V or -3.3 V supply.

In the differential input mode, both inputs D and D of the PRL-460ANLPD are terminated into 50 Ω/-2 V. In this mode, either one or both inputs can accept AC coupled signals as well.

In the single input mode, signals should be connected to the D inputs only. The D inputs are switched internally to VBB, nominally -1.3 V. The termination resistors, RT, for the D input channels are changed to 62 Ω.

A block diagram of the PRL-460ANLPD is shown in Fig. 1.

The PRL-430LP complementary outputs must be used together for driving differential LVPECL inputs only, because the reduced output logic swing of 400 mVPP (for short circuit protection reasons) is not logic level compatible with some single-ended LVPECL inputs.

The PRL-460ANLPD is supplied with a ±8.5 V AC/DC Adapter and housed in a 1.3 x 2.9 x 2.9-in. extruded aluminum enclosure.

Fig. 1 PRL-460ANLPD Block Diagram

(0° C ≤ TA ≤ 35° C)*

Symbol Parameter PRL-460ANLPD Unit
Min Typ Max
RIN Input Resistance 49.5 50.0 50.5 Ω
ROUT Output Resistance  49.5 50.0  50.5 Ω
VTT "D" Input Termination Voltage (fixed) -2.2 -2.0 -1.8 V
VT1 "D" Input Termination Voltage -2.2 -2.0 -1.8 V
VT1 "D" Input Termination Voltage (variable) -1.17 -1.30 -1.43 V
VOL Output Low Level 1.25 1.40 1.55 V
VOH Output High Level 1.70 1.85 2.00 V
VOPP1 Output Voltage Swing, f ≤ 550 MHz   400   mV
VOPP2 Output Voltage Swing, f ≤ 700 MHz   280   mV
IDC1 DC Input Current, +8.5 V   +125 +135 mA
IDC1 DC Input Current, -8.5 V   -138 -145 mA
VDC DC Input Voltage ±7.5 ±8.5 ±12 V
VAC AC/DC Adapter Input Voltage 103 115 127 V
tPLH Propagation Delay to output ↑   1.25   ns
tPHL Propagation Delay to output ↓   1.25   ns
tr/tf Rise/Fall Times (20% - 80%)*   600 850 ps
tSKEW Skew between any 2 outputs   50 120 ps
fmax Max Clock Frequency 1.25 1.50   GHz
  Size 1.3 x 2.9 x 2.9 in.
  Weight excluding AC adapter 7 Oz
  Shipping weight including AC adapter 4 lb.
* An unused complementary output must be either terminated into 50 Ω/VTT or AC coupled into a 50 Ω load; otherwise, output waveform distortion and rise time degradation will occur. Use the PRL-ACT-50 dual channel AC coupled 50 Ω Termination for terminating unused complementary outputs and the PRL-SC-104 DC Block or a 12dB AC coupled attenuator for connection of LVPECL signals to 50 Ω input oscilloscopes, if DC information is not needed. Otherwise, use the PRL-550NQ4X four channel LVPECL Terminators for the 50 Ω/VTT termination and for connection of LVPECL signals to 50 Ω input oscilloscopes.