PRL-304NI-0dB, 1:2 Differential RF Splitter Amplifier

Mini Modular Instruments > Splitters > PRL-304NI-0dB

Applications:

• 1:2 RF Differential Signal Fanout
• Transmission Line Drivers
• Single-Ended to Differential Signal Conversion
• RF Receivers
• Pulse Amplifiers
• General Purpose Wideband Amplifiers

Features:

• Ready to Use Amplifier with Two Identical Pairs of Differential Outputs
• 0.1 dB Differential Gain Match Typical @ 10 MHz
• Small Signal 3 dB BW to 430 MHz
• Clean Pulse Response
• 0 dB gain, V_O =V_IN (R_L = 50 Ω), well suited for cascading
• ±1.25 V, 2.5 V_PP, Maximum Outputs, R_L = 50 Ω
• DC Coupled 50 Ω I/Os
• ±90 mA Supply Current Maximum
• 1.3H x 2.8W x 2.2L-in. Module includes ±8.5V AC/DC Adapter

Description

The PRL-304NI-0dB is a 0 dB gain, DC-coupled 1:2 differential output RF splitter amplifier. It converts a single-ended input into two pairs of identical differential outputs. The gain match between any pair of differential output is 0.1 dB typical @ 10 MHz, and the small signal bandwidth is 430 MHz typical. Maximum output is ±1.25 V, or 2.5 V_PP into 50 Ω. Each output is 50 Ω back-terminated, and the input has a 50 Ω-to-ground termination. The 0 dB gain, V_O=V_IN (R_L = 50 Ω), allows multiple amplifiers to be cascaded for signal distribution applications.

The PRL-304NI-0dB has been optimized both for pulse response and for CW response, so that output overshoots and ringing for a fast pulse input are much smaller compared to those from amplifiers designed mainly for CW applications. With a 50 Ω back termination at each output, the amplifier can drive long transmission lines with or without load terminations. For optimum output response all outputs should be terminated into 50 Ω.

The PRL-304NI-0dB is housed in a 1.3H x 2.9W x 2.2L-in. aluminum enclosure and is supplied with a ±8.5 V AC/DC adapter. Besides the I/O and power connections, no other set up or connection is required. The PRL-304NI-0dB is a part of the PRL family of Mini Modular Instruments (MMIs).

PRL-304NI-0dB | Detail | Diagram | Specifications | Datasheet