Coupling and Termination Modules
- AC coupling between signals
- Waveform Clipping
- RF Signal Isolation
- RF I/O Port Decoupling
- Precision 50 Ω Termination
- RF Signal Detection
- DC Restoration
- DC Blocks with 0.1, 2.2 or 300 µf
- RF Chokes with 1 µh or 10 µh
- Series- or Shunt-connected Diodes
- Series-Connected Resistors from 50 Ω to 1 MΩ
- 0.5% 50 Ω Feedthru Terminations
- Dual AC- or DC-coupled 50 Ω Terminations
- SMA Male/Female I/O Connectors for inline use with no cabling required
- 0.44" W x 0.37" H x 1.5" L Modules
The PRL Series of Coupling and Termination Modules are two-terminal devices containing components which are series-connected, shunt-connected, or combination of both. They are intended for use in general purpose lab and production test environments.
For example, in a given test setup one may need to insert a DC Block, a 50 Ω Termination, a Feed-through Decoupling Capacitor, an RF Choke, a Series Diode, etc. in order to accommodate a change in the test requirement.
As of this date, the following modules are available, and more are being developed:
|Series-Connected||Shunt-Connected||Series and Shunt-connected|
|Series Capacitor||Feed-thru Shunt Capacitor||AC-Coupled 50 Ω Termination|
|Series Inductor||Feed-thru Shunt Resistor|| |
|Series Schottky Diode||Feed-thru Shunt Schottky Diode|| |
|Series Resistor|| || |
As of February 2011, PRL has discontinued the ready-to-use attenuator series, due to low demand. We will honor and support all outstanding quotations and orders, but we will not be offering new items for sale in quantities of less than 100. For volume orders, please contact email@example.com . To build your own attenuator, please see our Signal Conditioning Kits and our
Custom Attenuators application note.
If you don't see what you need, you can use our kits to build your own. Custom configurations containing combinations of different components may be available on special order.
Don't forget mating cables.
**All prices are for U.S. orders only. For export orders, please add 15%. Prices subject to change without notice. Please consult factory for additional information at +1-310-515-5330 or firstname.lastname@example.org**