Coupling and Termination Modules

Basic Lab Tools > Coupling and Termination Modules

Applications:

• AC coupling between signals
• Waveform Clipping
• RF Signal Isolation
• RF I/O Port Decoupling
• Precision 50 Ω Termination
• RF Signal Detection
• Microwave Signal Attenuation
• DC Restoration

Features:

• DC Blocks with 0.1, 2.2 or 300 µf
• RF Chokes with 1 µh or 10 µh
• Series- or Shunt-connected Diodes
• Series-Connected Resistors from 50 Ω to 1 MΩ
• 0.5% 50 Ω Feedthru Terminations
• Dual AC- or DC-coupled 50 Ω Terminations
• AC- or DC-Coupled Attenuators from 3 dB to 20 dB
• SMA Male/Female I/O Connectors for inline use with no cabling required
• 0.44" W x 0.37" H x 1.5" L Modules

Description

The PRL Series of Coupling and Termination Modules are two-terminal devices containing components which are series-connected, shunt-connected, or combination of both. They are intended for use in general purpose lab and production test environments. 

For example, in a given test setup one may need to insert a DC Block, an Attenuator, a 50 Ω Termination, a Feed-through Decoupling Capacitor, an RF Choke, a Series Diode, etc. in order to accommodate a change in the test requirement. 

As of this date, the following modules are available, and more are being developed:

Series-Connected	Shunt-Connected	Series and Shunt-connected
Series Capacitor	Feed-thru Shunt Capacitor	AC-Coupled 50 Ω Termination
Series Inductor	Feed-thru Shunt Resistor	AC Coupled Attenuator
Series Schottky Diode	Feed-thru Shunt Schottky Diode	DC Coupled Attentuator
Series Resistor

If you don't see what you need, you can use our kits to build your own. Custom configurations containing combinations of different components may be available on special order.

Ordering Information

***All prices are for domestic orders only. For international orders, please add 15%. Prices are subject to change without notice. Please consult factory for additional information at 310-515-5330.***

Detail | Diagram | Specifications | Datasheet