|
| |
PRL-432/433
Specifications
|
| Symbol |
Parameter |
PRL-432N |
PRL-433N |
Unit |
| Min |
Typ |
Max |
Min |
Typ |
Max |
| RIN |
Input Resistance
(low range) |
122 |
124 |
126 |
49.5 |
50 |
50.5 |
Ω |
| VTT |
Input
Termination Voltage (fixed) |
|
NA |
|
-2.2 |
-2 |
-1.8 |
V |
| IDC |
DC Input Current |
|
+30
-130 |
+60
-150 |
|
+30
-250 |
+45
-275 |
mA |
| VDC |
DC
Input Voltage |
±7.5 |
±8.5 |
±12 |
±7.5 |
±8.5 |
±12 |
V |
| VAC |
AC/DC
Adapter Input Voltage |
103 |
115 |
127 |
103 |
115 |
127 |
V |
| TPLH |
Propagation
Delay to output
↑ |
|
1500 |
|
|
1500 |
|
ps |
| TPHL |
Propagation
Delay to output
↓ |
|
1500 |
|
|
1500 |
|
ps |
| TF/TF |
Rise/Fall
times
(20% -80%) |
|
400 |
600 |
|
NA |
|
ps |
| FMAX |
Max
clock frequency |
400 |
600 |
|
400 |
600 |
|
MHz |
| TSKEW1 |
Skew between outputs |
|
20 |
100 |
|
20 |
100 |
ps |
| TSKEW2 |
Skew from unit to unit |
|
40 |
400 |
|
40 |
400 |
ps |
| |
Input Connector |
Triax3 |
SMA |
|
| |
Output Connector |
SMA |
Triax3 |
|
| |
Input Cables |
124 Ω
TP4 |
50 Ω Coax |
|
| |
Output Cables |
50 Ω
Coax |
124 Ω
TP4 |
|
| |
Size |
1.3" x 2.9" x
3.9" |
1.3" x 2.9" x 3.9"
|
In. |
| |
Weight |
7 |
7 |
Oz |
|
*Since the high frequency signals to and from the 124 Ω
I/O ports can not be measured easily, the 124 Ω I/O ports of these adapters
are first cascaded using shielded twisted pair
cables, Trompeter P/N PCGOW10PCG-36 or equivalent. Input signals are applied to the
50 Ω inputs of the PRL-433, and outputs of the PRL-432 are terminated
into 50 Ω/-2V, using the
PRL-550NQ4X, four
channel ECL Terminators, connected to a 50 Ω input sampling oscilloscope.
|
Notes:
-
The 50 Ω output rise and fall times were measured with both the Q and
Q outputs terminated into 50 Ω/-2 V. If
either output is left unterminated, both the rise and fall times will increase by
approximately 15%, and output waveform degradation will occur.
-
FMAX
is measured by AC coupling a sine wave to the D input using
the differential input mode (switch up). The differential outputs are first divided by
eight, using the PRL-255, and then measured using the
PRL-550NQ4X, four channel ECL
Terminator, connected to a sampling 'scope.
- Trompeter P/N CBBJR79.
- Trompeter PCB4W10PEA-36 cable is recommended for interfacing between the
CBBJR79 triax connector in the PRL-432N/433N and the twinax connector in the SONY DFC-1800.
-
All PRL products with Triax connectors use Trompeter P/N
CBBJR79, Right Angle Circuit Board Bulkhead Jack, 3-lug (Page 11
of
Trompeter
Mil/Aero Catalog). Any Trompeter 70-series Triax Cable Plug with 3 lugs (e.g.
PL75-9, 3-lug) will mate with CBBJR79. Cable Plugs are on Page 9
of
Trompeter
Mil/Aero Catalog.
|
|
|
