Pulse Research Lab logo
View Cart/ Check Out
Mini Modular Instruments
Bias Tees
Clock Sources
Comparators/Sinewave Converters
Coupling & Termination Modules
Delay Generators
Differential Line
Drivers/Receivers
ECL/PECL Terminators
Fanout Buffers
Frequency Dividers
Logic Level Translators
Long Line Drivers
RF Power Dividers &
Active Splitters
RF Switches, Scanners & Gates
Signal Conditioning Kits
Variable Output
Pulse Drivers
Systems
Semi-Custom Systems
Rackmount Kits
Accessories
Op Amp Proto Kits
Power Sources & Modules
Enclosures & Extrusions
Accessories and Cables
About Us
Ordering Information
FAQ/Support
What's New
Contact Us
Pulse Instruments
Back to Top

PRL-426RS Specifications

Mini Modular Instruments > Logic Level Translators > PRL-426RS > Specifications

SPECIFICATIONS (0° C ≤ TA ≤ 35° C)*

SYMBOL PARAMETER PRL-426RS UNIT
Min Typ Max
RIN Input Resistance 122 124 126
RINC Common Mode Input Resistance   5k  
VCM Input Common Mode Voltage -2.0   +3.0 V
ROUT Output Resistance 49.5 50.0 50.5
VOL Output Low Level   0.9   V
VOH Output High Level   1.5   V
VCMV Common mode voltage1   1.2   V
IDC1 DC Input Current, +8.5 VDC   85 100 mA
IDC2 DC Input Current, -8.5 VDC   -265 -300 mA
VDC DC Input Voltage ±7.5 ±8.5 ±12 V
VAC AC/DC Adapter Input Voltage 103 115 127 V
tPLH Propagation Delay to output ↑   2   ns
tPHL Propagation Delay to output ↓   2   ns
tR/tF Rise/Fall Times (10%-90%)2   1 1.25 ns
tSKEW Skew between any 2 outputs3   200 500 ps
fMAX Max Clock Frequency4 500 625   MHz
  Size 1.3 x 2.9 x 3.9 in.
  Weight 7 Oz
Notes: 
(1) VCMV = (VoH-VoL)/2 
(2) Rise and Fall times are measured with SMA output connector units only and with ground-referenced 50 Ω loads. 
(3) Skew is measured at the output of a PRL-425N when driven by a PRL-426RS
(4) fmax is measured using a PRL-425N with the corresponding input connectors as the receiver. The NECL outputs of the PRL-425N are measured.
Units with the Trompeter CBBJR79 Triax ouput connectors are tested using the PRL-425NTR, Universal Differential Receiver (Triax) with Differential NECL outputs, and the Trompeter PCGOW10PCG-36 shielded twisted pair cables.

All PRL products with Triax connectors use Trompeter P/N CBBJR79, Right Angle Circuit Board Bulkhead Jack, 3-lug (Numbered page 10, document page 11 of 142). Any Trompeter 70-series Triax Cable Plug with 3 lugs (e.g. PL75-9, 3-lug) will mate with CBBJR79.


PRL-426RS | Detail | Diagrams | Specifications | Datasheet