Pulse Research Lab logo
View Cart/ Check Out
Register with PRL
Mini Modular Instruments
Bias Tees
Clock Sources
Comparators/Sinewave Converters
Coupling & Termination Modules
Delay Generators
Differential Line
Drivers/Receivers
ECL/PECL Terminators
Fanout Buffers
Frequency Dividers
Logic Level Translators
Long Line Drivers
RF Power Dividers &
Splitters
RF Switches, Scanners & Gates
Signal Conditioning Kits
Variable Output
Pulse Drivers
Small Systems
Prototyping Kits & Adapters
Surface Mount Development Kits
Surface Mount Adapters (Gigadapters)
Gigadapter Motherboards
Breadboard/
Prototyping Kits
Op Amp Proto Kits
Power Sources & Modules
Enclosures & Extrusions
Accessories and Cables
About Us
Ordering Information
FAQ/Support
What's New
Contact Us
Search
Pulse Instruments
Back to Top

PRL-350TTL/ECL/P/LP/RS Dual Channel Comparators

Basic Lab ToolsComparators > PRL-350

Applications:

  • Window Comparators
  • High Speed Timing
  • Line Receivers
  • Threshold Detection
  • Peak Detection

PRL-350ECL, Qty:   @ $525/ea.
PRL-350TTL, Qty:   @ $525/ea.
PRL-350P, Qty:   @ $525/ea.
PRL-350LP, Qty:   @ $525/ea.
PRL-350RS, Qty:   @ $525/ea.

Features:

  • fmax > 1000/300 MHz for PRL-350ECL/PRL-350TTL
  • 750 ps/ 1.1ns Typical tr for PRL-350ECL/PRL-350TTL
  • +50 mV, 0 V or -50 mV Preset Input Threshold Voltage
  • -2.0 V to +3.0 V Input Common Mode Range
  • 10 mV p-p Minimum Input @ 300 MHz.
  • DC Coupled 50 Ω Inputs
  • Complementary ECL/TTL Outputs
  • SMA I/O Connectors
  • Self-contained units include AC/DC Adapters

Description

The PRL-350ECL and PRL-350TTL are ready-to-use, high speed dual-channel comparator modules. The PRL-350ECL has a maximum clock frequency in excess of 1 GHz and has complementary ECL outputs designed for driving 50 Ω transmission lines terminated to 50 Ω/-2 V. The PRL-350TTL has a maximum clock frequency in excess of 300 MHz and has complementary TTL outputs designed for driving 50 Ω transmission lines with or without 50 Ω load terminations. The PRL-350P is the PECL version, and the PRL-350LP is the LVPECL version.

Both models have DC coupled 50 Ω inputs and outputs. Input threshold voltage can be selected either from a set of preset values of +50 mV, 0 V or 50 mV using a common three-position switch, or varied independently in each channel by applying a DC voltage to one of the two inputs. Input Common Mode Range is -2.0 V to +3.0 V.

These high speed comparators are Mini Modular Instruments ™ that can be used as peak detectors, threshold detectors, sine wave to square wave converters, window comparators or differential line receivers, etc. Typical minimum input voltage required at 300 MHz is 10 mV p-p. into 50 Ω.

Each unit is supplied with a ±8.5 V AC/DC Adapter and housed in an attractive 1.3 x 2.9 x 3.9-in. extruded aluminum enclosure.

* Although the PRL-350ECL typically operates up to 2 GHz, the internal device is specified at 1 GHz by the device manufacturer; therefore the guaranteed fMAX is 1 GHz.

Detail | Diagrams | SpecificationsDatasheet (350TTL/ECL)Datasheet (350P/LP)Datasheet (350RS)