PRL-258 Specifications*OBSOLETE* The PRL-258 has been discontinued. New applications should use the PRL-174ANT for clock generation, or the PRL-260ANT for frequency division. Information about the PRL-258 is for information only.Basic Lab Tools > Frequency Dividers > PRL-258 > Specifications |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
(0° C ≤ TA ≤ 35° C)* |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
*All dynamic measurements are made with outputs terminated into 50 Ω /-2 V, using the PRL-550NQ4X, four channel ECL Terminators, connected to a 50 Ω input sampling oscilloscope. Notes: (1). The output rise and fall times of each channel are measured with its complementary output terminated into 50 Ω /-2 V. An unused complementary 50 Ω output must be either terminated into 50 Ω /-2 V or AC coupled into a 50 Ω load; otherwise, output waveform distortion and rise time degradation will occur. Use the PRL-504 or PRL-508, four and eight channel ECL Termination modules, respectively, for the 50 Ω /-2 V termination. Use the PRL-550NQ4X four channel ECL Terminator for the 50 Ω /-2 V termination and for connection of ECL signals to 50 Ω input oscilloscopes. (2). fMAX is measured by dividing each pair of differential outputs by four, using the PRL-255, and then measured using the PRL-550NQ4X four channel ECL Terminator connected to a sampling oscilloscope. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
PRL-258 | Detail | Diagram | Datasheet |