PRL-431N, NECL 1:2 Differential Fanout Buffer

PRL-431P, PECL 1:2 Differential Fanout Buffer

PRL-431LP, LVPECL 1:2 Differential Fanout Buffer

Mini Modular Instruments > Fanout Buffers > PRL-431

Applications:

• Fanout Single-ended Input signals into two pairs of Differential signals for driving long lines
• Ideal for receiving signals from long lines
• Fanout GHz Sinewave signals into two pairs of Differential ECL, PECL, or LVPECL signals
• 1 PPS/IRIG-B Signal Distribution
• An Essential Lab Tool for Working with ECL, PECL and LVPECL Circuits

Features:

• 3 GHz f_MAX
• Single-ended or Differential Inputs
• Internal 50 Ω/V_TT Input Terminations also accept AC coupled Signals
• Complementary Outputs drive 50 Ω loads terminated to V_TT
• DC Coupled I/O’s Compatible with ECLinPS or 10KH Devices
• SMA I/O Connectors
• Ready-to-Use 1.3 x 2 9 x 2 2-in. Module includes a ±8.5 V AC/DC Adapter
• Rack-mountable 4:8 ECL unit also available

Description

The PRL-431N, PRL-431P, and PRL-431LP are a 1:2 Differential Fanout ECL, PECL and LVPECL Buffer modules, respectively. They are essential lab tools for applications where it is necessary to drive two different loads from a source of single-ended or differential ECL, PECL or LVPECL signals. They can also be used for converting GHz sine wave signals into differential ECL, PECL or LVPECL signals.

A switch selects either single-ended or differential inputs, as shown in Fig. 1. In the differential input mode, both inputs D and D are terminated internally into 50 Ω/V_TT*, and, therefore, either one or both inputs can accept AC-coupled signals as well. In the single input mode, signal should be connected to the D input only. The D input is switched internally to V_BB**, and termination resistor R_T for the D input is changed to 62 Ω. Complementary outputs of the PRL-431N are designed for driving 50 Ω loads terminated into -2 V. Complementary outputs of the PRL-431P are designed for driving 50 Ω loads terminated into +3 V. Complementary outputs of the PRL-431LP are designed for driving 50 Ω loads terminated into +1.3 V. With internal pull-down resistors, these outputs can also be AC-coupled for driving 50 Ω loads terminated to ground or to other voltages.

The PRL-431N, PRL-431P, and PRL-431LP are each housed in a 1.3 x 2.9 x 2.2-in. extruded aluminum enclosure and supplied with a ±8.5 V/1.4 A AC/DC Adapter.

V_TT is nominally -2.0 V for ECL, +3.0 V for PECL, and +1.3 V for LVPECL. V_BB is nominally -1.3 V for ECL, +3.7 V for PECL, and 2.0 V for LVPECL

**All prices are for U.S. orders only. For export orders, please add 15%. Prices subject to change without notice. Please consult factory for additional information at +1-310-515-5330 or sales@pulseresearchlab.com**

Detail | Diagram | Specifications | Datasheet (PRL-431N/431P) | Datasheet (PRL-431LP)